How To Use An Electronic Cigarette?

Are you vaping for the first time and don’t know how to light your electronic cigarette? Here are some tips to guide you. Vaping can be learned. Choosing your electronic cigarette, the flavours of e-liquid, mounting the different elements… vaping goes through a whole series of stages. One of the most important is the ignition of electronic cigarettes. Generally, electronic cigarettes are equipped with a Switch button also called a contactor. However, the ignition modes differ depending on the model. Immediate details.

If you are vaping for the first time and you do not have the user guide in hand, take note of the following procedures before starting your electronic cigarette. Once all the elements of the electronic cigarette are ready, the first step is to assemble them. The second step concerns the ignition of the vape. Before that, there are a few options to consider. First of all, you have to make sure that the battery is full. To do this, you must recharge the electronic cigarette. This can take between 2 to 4 hours depending on the model. To recharge the battery, simply connect the electronic cigarette to a USB port on your computer or to a wall outlet using an adapter. Another point: the e-liquid must be already ready. Indeed, you will not be able to vape without this element. Thus, well before lighting the electronic cigarette, be sure to insert the e-liquid inside the tank. E-cigarettes are diverse, some are made up of Tank, while others have Ego-T tanks. For the Tank reservoir, you simply have to pour the e-liquid inside. On the other hand, with the Ego-T tank, given that it has a wad, it is necessary to impregnate the latter with e-liquid. This action takes much longer.

Whether box-shaped or tube-shaped, e-cigarettes generally light up the same way. That is to say thanks to a contactor. Most e-cigarettes also have a display that tells you the usage status. If your electronic cigarette does not have a control screen, you will be informed that it is working thanks to an LED indicator. Now let’s get started with the electronic cigarette. To do this, press the switch button five times quickly. You will know the e-cigarette is on by looking at the display or battery LED indicator. In this second scenario, the LED will flash three times. The same action is to be performed to turn off the electronic cigarette. After starting the electronic cigarette, you can immediately switch to vaping! Our advice: it would be good to start with small puffs to prevent the resistance from heating up.

While using your electronic cigarette, it may not light up. The first instinct you must have is to check the hardware. Make sure the battery is fully charged. Then, check that the resistance is well fixed to the atomizer. It could also be that the resistor is faulty. If you notice a malfunction of the resistor, consider replacing it. Finally, note that for most models of electronic cigarettes, the start is done by 5 quick presses, ie in less than 2 seconds. If you do not press quickly enough, the electronic cigarette will not turn on. Important: to avoid facing difficulties frequently, opt for electronic cigarettes of recognized brands.